RT Spares

Standard Single-pole changeover switch (SPDT) with terminal board proof against leakate current Fitted in all standard versions of type RT. Snap action changeover contacts.

Manual reset of unit after contact changeover on rising pressure For units with max. reset.

Manual reset of units after contact changeover on falling pressure. For units with min. reset.

Single-pole changeover switch (SPDT) with gold plated (oxide-free) contact surfaces. Increases cut-in reliability on alarm and monitoring systems, etc. Snap action changeover contacts. Terminal board proof against leakage current.

017-4034

Single-pole changeover switch that cuts in two circuits simultaneously on rising pressure. Snap action changeover contacts. Terminal board proof against leakage current.

017-0181

Single-pole changeover with non-snap action changeover gold plated (oxide-free) contacts.

Gold Plated Switches – For manual reset of unit after contact changeover on falling pressure. Gold plated (oxide-free) contact surfaces

Gold Plated Switches – For manual reset of unit after contact changeover on rising pressure. Gold plated (oxide-free) contact surfaces

Black seal cap to replace setting knob so that Setting can only be altered with tools

Seal screws for cover and seal cap

Capillary tube gland For all RT thermostats with remote sensor. G½A (pipe thread ISO 228/1), oil resistant rubber washer for max. 110°C/90 bar

Capillary tube gland For all RT thermostats with remote sensor. G3/4A (pipe thread ISO 228/1), oil resistant rubber washer for max. 110°C/90 bar

Heat conductive compound For RT thermostats with the sensor insert in a pocket. Tube with 3.5cm3 compound to be filled in the sensor pocket to improve heat transfer between pocket and sensor. Application range for compound: −20 to +150°C, momentarily up to 220°C

017-4201

Sensor holder For RT 14, RT 101 and RT 270. Sensor holder for wall mounting incl. four capillary tube clips