RHEYCORD® (RTS) (N)SHTOEU-J Cable

Extra Heavy Duty Reeling Cables

Applications

Extra heavy duty rubber reeling cable for control and power supplies. For applications with high mechanical stress, especially for simultaneous tensile and torsional stress. Suitable for motor-driven reels, spring-operated reels, drum spreader and hoisting systems.

Design

1. Conductor	Flexible, plain copper, “FSC” better than IEC 60228 class 5
2. Insulation	RHEYCLEAN-HEPR better than IEC 60502-1
3. Inner sheath	Special synthetic rubber, based on PCP
4. Central strength member	(only for spreader cable)
5. Outer sheath	Rubber, new special sandwich construction with incorporated anti-torsion braid for a optimum of flexibility and heavy duty. Abrasion and notch resistant.
Colour:	Yellow

Marking

RHEYCORD(RTS) (N)SHTOEU-J
Number of cores – cross-section 0.6/1 kV – NEXANS – year

Core Identification

DIN VDE 0293 part 308/ HD 308 S2
4 cores: green/yellow – brown – black – grey
5 cores: green/yellow – blue – brown – black – grey
≥ 5 cores: black with white printed numbers – green/yellow (in the outer layer)
6 cores design: brown – black – grey – 3 green/yellow (in the interstices)

Standards

In line with DIN VDE 0250 part 814

Mechanical properties

Tensile stress of the conductor	static	15 N/mm²
	dynamic	30 N/mm²
Bending radii	according to DIN VDE 298,
Tests	alternating/reversed and roller bending test,
	torsional resistance test
Reeling speed	up to 240 m/min (for higher speed contact us)
Hoisting speed	up to 160 m/min (for higher speed contact us)

Chemical properties

Oil resistant.

For indoor and outdoor applications. Moisture, UV and ozone resistance.

Flame-retardant according to IEC 60 332 part 1.

Electrical and Thermal properties

Nominal voltage	Uo/U	0.6/1 kV
Maximum operating voltage in AC systems	Um	1.2 kV
Maximum operating voltage in DC systems	Vm	1.8 kV
Test voltage:
– Power	3.0 kV in AC
– Control	2.0 kV in AC
Current rating (A)	according to DIN VDE 0298 part 4,

Max. temperature at the conductor:
– in service	+ 90 °C
– under short-circuit conditions	+ 250 °C
Max. surface temperature:
– fixed installation	– 50 °C up to + 80 °C
– mobile operation	– 40 °C up to + 80 °C